Mountain iPhone Case |

The goods are handmade and are made under the order, and therefore in the case of ordering the wrong model, the goods can not be exchanged and returned. If you doubt the choice of the model of your device, please contact the store owner.

Welcome! I’m glad to introduce you my shop. It is a place where you can find colorful marvelous handmade cases for your phone.

See more of my ANIMAL cases here: http://etsy.me/1OzBnEC

See more of my BUMPER CASES here: http://etsy.me/1MSmGH6

》 Item you are looking at will make your phone look perfect covered and protected with this original designed case cover.

》 Materials that I use are 100% high quality and eco-friendly durable long-lasting lightweight hard plastic and rubber.

》 Protection Case will provide you access to all necessary buttons, there is no need to take off the case to charge the phone and it fits tight.

》 Case is very light and has small dimensions and it will make your phone feel more natural in hand anyway fully protected from scratched and damages.

All orders are made to order especially for you and it can take about 2-5 business days to prepare perfect item for shipping. Shipping time can take about from 2 to 5 weeks. Please don’t worry about shipping time, all your orders will be personally packed, prepared and shipped out using Registered Ukrainian AirMail with tracking number that will be send to you.

For more policy details please follow the link https://www.etsy.com/shop/WolfCases/policy

All colors that you see on the listing are real and I try my best to provide you the same colorful image on your item, but sometimes few colors may vary a bit due to different monitors in use.

How to stick the film:

1. Get a screen protector.
2. Understand the limitations of a screen protector.
3. Find a low-dust workspace.
4. Wash your hands. Dry them with a clean towel. Shake off any excessive lint.
5. Clean the screen. Wipe it with a mild solvent like eyeglass cleaner or rubbing alcohol–or a damp soapy rag, which would not risk damage to low quality surrounding finishes. Rub it dry with a soft cloth and remove as much lint as possible with a blower or by wiping lightly with a lint free cloth, such as the microfiber wipe often provided with the screen protector.
6. Check placement of the screen protector. Carefully remove it from its box or packaging.Before you lift its backing, position the screen protector over the screen to see how much margin to leave on each side and ensure clearance of features such as camera spots (with which the screen protector’s less even surface would interfere) and microphone holes.
7. Remove residual bits of dust with a mild adhesive. Dust is the most important thing to remove from under a screen protector: bubbles will eventually diffuse out through the plastic and tiny finger marks will probably merge with the glue, but dust specks stay. Lightly dab a sticky note (such as a “Post-it”) all over the screen. Looking at the reflection of a bright area in the screen at an angle will confirm the presence or absence of dust. Quickly attach the screen protector before dust can gather!
8. Stick on the screen protector, aligning an edge carefully. Peel back the screen protector’s backing from one end (leaving it on the other allows more control by holding that end). Align it with the correct edge of the screen, leaving the margin you determined previously and watching how the alignment of the sides perpendicular to it will fall. Then peel off the entire backing and smooth down the protector.
9. Remove air bubbles. Wipe the air bubbles toward the edges with a smooth implement like a credit card. Don’t do this forcefully unless the screen protector has a surface protector to peel off after installation: the air will eventually diffuse out and too much force could scratch the brand-new protector.

How to stick the glass:

1. Get a screen protector.
2. Understand the limitations of a screen protector.
3. Find a low-dust workspace.
4. Wash your hands. Dry them with a clean towel. Shake off any excessive lint.
5. Clean the screen. Wipe it with a mild solvent like eyeglass cleaner or rubbing alcohol–or a damp soapy rag, which would not risk damage to low quality surrounding finishes. Rub it dry with a soft cloth and remove as much lint as possible with a blower or by wiping lightly with a lint free cloth, such as the microfiber wipe often provided with the screen protector.
6. Remove the Protective Layer. Go ahead and pull out the actual glass protector. There’s a protective plastic film on one side. Remove it to expose the adhesive side of the glass, but be sure to hold it by the edges so that you don’t leave fingerprints on the surface. This side will be going face down on the Phone.
7. Make sure to align the glass with the display portion of your screen. The glass should line up evenly with the front speaker and home button, and it should run parallel with the screen length-wise.
8. Press It On. Once the glass protector has been properly aligned, carefully lay it down on the screen. If you make a mistake and the glass looks off-kilter, you can gently lift it up and realign it. Then, once the protector is on the screen, give it a soft press in the center and allow the adhesive surface to grip to the screen naturally.
9. If there are any bubbles remaining — and there may not be — use the cloth provided to gently smooth them toward the edges of the glass protector.

If you have any question please feel free to send me a message and we will do my best to help you in a fastest way.

My objective is to ensure you completely satisfied with your shopping experience.
STAY TUNED FOR UPDATES!

Do you follow us on all our social media platforms? We share various interesting video reviews, special coupons and creative ideas:) Join us!

Instagram: @wolf_cases
Facebook: facebook.com/wolfcaseshandmade
Pinterest: pinterest.com/wolfcases
Thank you!